Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Home Hostname

I am setting up a UTM at home, when I give it a hostname does it need to be resolvable across the internet?


This thread was automatically locked due to age.
Parents
  • well I've seen issues with mail processing going that route.  If it works great but it is not the recommended configuration and not the configuration that IME is the most trouble free..[:)]

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Reply
  • well I've seen issues with mail processing going that route.  If it works great but it is not the recommended configuration and not the configuration that IME is the most trouble free..[:)]

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Children
  • I'm only setting up for small home network without a mail server. So I take it this will not be an issue for me?
  • I'm only setting up for small home network without a mail server. So I take it this will not be an issue for me?


    nopers.  if you want ot use remote access you can either set the hostname to the dyndns or an internal one and use the hostname override for remote access..[:)]

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

  • I currently have dyndns setup on my dlink router, but when I put in the UTM in I will be setting the router to bridging mode so will dyndns need to be setup on utm instead?
  • I currently have dyndns setup on my dlink router, but when I put in the UTM in I will be setting the router to bridging mode so will dyndns need to be setup on utm instead?


    Probably.

    The UTM does support several dynamic DNS services.

    Barry
  • I currently have dyndns setup on my dlink router, but when I put in the UTM in I will be setting the router to bridging mode so will dyndns need to be setup on utm instead?


    Probably.

    The UTM does support several dynamic DNS services.

    Barry


    In case it matters, I have my home UTM configured to work with freeDNS.afraid.org for dynamic DNS services. I disabled it once the UTM took over. 

    Dynamic DNS with freedns.afraid.org was trivial to configure on the UTM. Simply put, it just works, and there are no strings attached to freedns.afraid.org services. 

    (Before I set up the UTM to maintain IP address updates, I had to write some custom code to get it to work from my home server.)

    I recommend freedns.afraid.org because it is truly free. For many years I used DynDNS, and briefly tried No-IP. Those services changed as they attempted to monetize their users. These days, their "free" services require you to open your browser and connect (login) at least once every 30 days. They also send lots of spam email. I appreciate their past free services, but they can no longer be considered "free". Now, they are simply a pain in the ...."

    freedns.afraid.org is simple and free for basic users like me. Note: If you like their services, I suggest you give them a donation. I did.
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?