This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Why does my 9.0 Home System Regularly Reboot?

I was using Asatro on a Pentium PC since version 6. It has always been rock solid. The system would only fail if there was a power failure. A few weeks ago I started  testing the 9.x beta. Within a few days I noticed that the system was restarting about every 24 hours or so. There was no apparent cause. I figured it was a beta problem. I should reported it.

On Saturday I installed a new copy of 9.0. Since then it has restarted twice that I know of (I knew because I was online and I lost Internet connectivity).

Any idea how to troubleshoot restarting problems? Is there a log that tells me the cause?

Thanks.

System Details:
9.000-8
Running on Pentium Duo 64-bit 3.2Ghz PC
10 devices including four lightly used Windows PC's
Running


This thread was automatically locked due to age.
  • Hi, I'd start with the system log.

    Also consider running memtest86 to test the hardware. iirc, it's available when booting from the Astaro CD.

    Barry
  • v9 and a pentium?  I would check the cpu temp...it's entirely possible just the sheer weight of v9 is taxing the cpu and ram so much that they've become weak with age.  i frankly would invest in new hardware.  AMD e series and intel atoms are good home platforms.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

  • Sounds like a hardware issue.  Unlike windows, it is nearly impossible for software issues to randomly reboot or cause a hard reboot of the computer, especially with the way ASH is build.  

    I'd put money on a bad stick of ram, hdd, or psu.
  • Hi, I'd start with the system log.

    Also consider running memtest86 to test the hardware. iirc, it's available when booting from the Astaro CD.

    Barry


    No clues that I can find in the system log. It only shows data since immediately after the last reboot.

    I will run the Memtest.

    It seems odd that a couple of weeks ago that v.8 was working fine and upgrading to v.9 "coincidentally" started the unexpected reboot problem. I am going to go back to v.8 for a few days after I finish Memtest to see what the results will be.

    Thanks.
  • I'm betting v9 is just stressing your system beyond it's ability to cope...

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

  • v9 and a pentium?  I would check the cpu temp...it's entirely possible just the sheer weight of v9 is taxing the cpu and ram so much that they've become weak with age.  i frankly would invest in new hardware.  AMD e series and intel atoms are good home platforms.


    Thanks for the response. no indications of an CPU problems despite record heat. The CPU is in an air conditioned basement which averages around 70 degrees F this time of year. The last reboot occurred at 6 in the morning when it was very cool.

    In the last week the CPU hit greater than 50% only twice with a high of 68%. Avg CPU utilization is 1.42%. Max memory usage in the past week is 24% and the avg. is 3.25%. The system was purchased in 2009. Things can go bad when you open a new box but its seems unlikely that a CPU and RAM working great with 8.x until recently would suddenly start exhibiting problems. Anything is possible.
  • i've seen it before.  Also as the new software comes online it may not be compatible with older platforms and may just simply act odd....like rebooting.  it is something with the hardware v9 doesn't like.  New hardware is going to fix this issue.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

  • i've seen it before.  Also as the new software comes online it may not be compatible with older platforms and may just simply act odd....like rebooting.  it is something with the hardware v9 doesn't like.  New hardware is going to fix this issue.


    It will be this, or a bad power supply, which does happen often.

    XG 19.5 GA 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | GB Ethernet x5

  • It will be this, or a bad power supply, which does happen often.


    I've had a few computers that have literally never been turned off for a couple of years (on a UPS).  They've been rebooted and had different OS's installed, but the components have never actually been powered down and turned off.  

    It just so happens that these types of systems have a nasty way of either not turning back on if completely shut down and left off for a couple of days, or booting back up and acting weird.  I've also had PSU's blow a cap and while the computer will sometimes hobble along for awhile depending on the load on the PSU, it will exhibit random crashes and lock-ups due to one of the rails inevitably being way under voltage.  

    I did the "build your own firewall" for awhile as I wanted a low-power draw atom type CPU.  Then Supermicro released the latest versions of their Atom boards with dual Intel gigabit NICs onboard and stuffed everything in a tiny 1/2 1U depth case and I was sold.  They come with everything but ram & HDD, and will actually (unofficially) take 8GB of DDR3 (2x 4GB SODIMMS).

    With VMWare ESXi 5, IPMI management, ASG, FreeNAS, and a Netgear VLAN switch, it's perfect for running your entire home network.  

    Super Micro Computer, Inc. - Products | SuperServers | 1U | 5015A-EHF-D525