This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 7GA installation problems

i have a dell optiplex gx270 with 4 nics installed. 2gb ram. 80gb hd

after the latest step it comes with the following error.

installation failed

please remove cd-rom and restart the system.

when i check the log file i see the following

phase start: install
checking md5 sums
sh: line 0: cd: /install/install/: no such file or directory
/usr/bin/md5sum/: install.md5: no such file or directory
return code: 256
Phase end: install (ret=0)
 umount: /dest//sys: no such file or directory
 umount: /dest//proc: no such file or directory
 umount: /dest//boot: no such file or directory
 umount: /dest//opt/inst: no such file or directory
 umount: /dest//var/storage: no such file or directory
 umount: /dest//var/log: no such file or directory
 umount: /dest//tmp: no such file or directory
 umount: /dest//: invalid argument

dont know what the problem is. 
i tried with a different cd burned with lower speed.
different hd
checked the memory
removed 2 nics.


This thread was automatically locked due to age.
Parents Reply Children
  • Had the same issues trying to install on a Sony VAIO RX538

    Return code 256 
    unable to mount file systems

    What worked for me was the following

    a.) burn the ISO at the lowest burn rate possible; ISO burning software was DeepBurn
    b.) Disconnect my slave CDROM drive
    c.) In the BIOS set my HD to manual and use LBA

    After these changes the install went like clock work.