This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 7GA installation problems

i have a dell optiplex gx270 with 4 nics installed. 2gb ram. 80gb hd

after the latest step it comes with the following error.

installation failed

please remove cd-rom and restart the system.

when i check the log file i see the following

phase start: install
checking md5 sums
sh: line 0: cd: /install/install/: no such file or directory
/usr/bin/md5sum/: install.md5: no such file or directory
return code: 256
Phase end: install (ret=0)
 umount: /dest//sys: no such file or directory
 umount: /dest//proc: no such file or directory
 umount: /dest//boot: no such file or directory
 umount: /dest//opt/inst: no such file or directory
 umount: /dest//var/storage: no such file or directory
 umount: /dest//var/log: no such file or directory
 umount: /dest//tmp: no such file or directory
 umount: /dest//: invalid argument

dont know what the problem is. 
i tried with a different cd burned with lower speed.
different hd
checked the memory
removed 2 nics.


This thread was automatically locked due to age.
Parents
  • Sorry to tell, but whilst trying to install the v7 I experience the same problem.
    It says installation failed. remove disc and restart.

    What's this about?

    I tried with 2 different computers, with 3 different cd drives and 1 cd burning device. I tried with 3 different harddrives.

    Following log entries on console 3:

    /usr/bin/md5sum: WARNING: 9 of 343 listed file could not be read
    Return code: 256
    PHASE END. install (ret=0)
    and then some:  umount: /dest//sys No such file and directory
    ... and such stuff

    So it still didn't work out. Please help!

    Michael
  • Guys are you both using SATA drives?
Reply Children