Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 1307 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LAN Interface not negotiating 1000FD

DipeshNagar

Hi all

My LAN port does not negotiate anything more than 100FD.

If I force the LAN port to 1000fd, the port goes dead.

I have connected the Firewall to a Switch that supports 1000fd and other devices negotiate 1000fd without any problems.

Looking for some advise to resole my 100fd LAN limit

Ps is the 100Fd a limit on the home edition of XG ?

Thanks in advance.

Dipesh



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to rfcat_vk

    HI, Ian

    Yes 1000fd is 1gig Full duplex.

    The XG is set to Auto Negotiate on the interface and even if i force it 1000 full duplex from the console, then the network port goes dead.

    Command used to try and force to 1000fd is as follows "set network interface-speed Port1 speed 1000fd"

    I am using Intel Gigabit CT PCI-E Network Adapter EXPI9301CTBLK

    Regards

    Dipesh

  • 0 in reply to DipeshNagar

    Hi,

    you should be able to set the interface to auto from the GUI. There is no need to use the CLI. Sounds like you might have a fault cable or the interface device is faulty.

    Ian