Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 2820 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SFOS 18.0.0 GA-Build339 Port2 (WAN) Showing as unplugged

Daniel Bingham

Hi,

I just did an upgrade from SFOS 17.5.10 MR-10 to SFOS 18.0.0 GA-Build339.

 

All went smoothly, rebooted, I'm  a happy camper but then I notice that there's no internet connectivity.

 

I look under Network Interfaces and see that my PPPoE is showing as unplugged.

 

I check all cables and all is fine so I do the old turn it off and back on again IT Crowd trick. I noticed on my hardware upon boot, the link light is on but once booted it goes out.

 

So I rolled back to SFOS 17.5.10 MR-10 and everything is perfect again

 

Has anybody seen this with SFOS 18.0.0 GA-Build339 and knows what the fix is?

 

Thanks

 



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    is this installation on Sophos hardware or home hardware? How many ports do you have and what model are the chips on the NICs if this is home hardware?

    Intel i219 series are not supported.

     

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Its home hardware (Shuttle DH310)

    2X GbE port (Intel i211) NIC's on the board.  I must stress that the LAN side of the XG worked perfect. It was the WAN port that gave me issues

     

     

     

  • +1 in reply to Daniel Bingham
    Thank you for the pretty pictures. Why does your v17 network show a 100 and a 1000 connection on the same interface? The WAN interface does not appear to auto negotiate and maybe the driver in v18 is a little more strict with connectivity. Have you restarted your modem. eg powered it off for about minute them on again? Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    rfcat_vk said:
    Why does your v17 network show a 100 and a 1000 connection on the same interface?

     

    Unsure. It always has.

     

    It is directly connected to my FTTP NBN (Australia) Connection.

    I did restart the NTD. I will try and force it to 100mb or 1000mb and see if it behaves.

     

    Thanks

Reply
  • 0 in reply to rfcat_vk

    rfcat_vk said:
    Why does your v17 network show a 100 and a 1000 connection on the same interface?

     

    Unsure. It always has.

     

    It is directly connected to my FTTP NBN (Australia) Connection.

    I did restart the NTD. I will try and force it to 100mb or 1000mb and see if it behaves.

     

    Thanks

Children
Cookie Information Banner