Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 2820 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SFOS 18.0.0 GA-Build339 Port2 (WAN) Showing as unplugged

Daniel Bingham

Hi,

I just did an upgrade from SFOS 17.5.10 MR-10 to SFOS 18.0.0 GA-Build339.

 

All went smoothly, rebooted, I'm  a happy camper but then I notice that there's no internet connectivity.

 

I look under Network Interfaces and see that my PPPoE is showing as unplugged.

 

I check all cables and all is fine so I do the old turn it off and back on again IT Crowd trick. I noticed on my hardware upon boot, the link light is on but once booted it goes out.

 

So I rolled back to SFOS 17.5.10 MR-10 and everything is perfect again

 

Has anybody seen this with SFOS 18.0.0 GA-Build339 and knows what the fix is?

 

Thanks

 



This thread was automatically locked due to age.
Parents Reply Children
  • +1 in reply to Daniel Bingham
    Thank you for the pretty pictures. Why does your v17 network show a 100 and a 1000 connection on the same interface? The WAN interface does not appear to auto negotiate and maybe the driver in v18 is a little more strict with connectivity. Have you restarted your modem. eg powered it off for about minute them on again? Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    rfcat_vk said:
    Why does your v17 network show a 100 and a 1000 connection on the same interface?

     

    Unsure. It always has.

     

    It is directly connected to my FTTP NBN (Australia) Connection.

    I did restart the NTD. I will try and force it to 100mb or 1000mb and see if it behaves.

     

    Thanks

  • 0 in reply to Daniel Bingham

    Hi

    lucky you, all I got was fttc. Try turning on auto-negotiate.

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    rfcat_vk said:
    ucky you, all I got was fttc

    There are some bonuses to where I live I guess!

     

    Okay, thanks, I will give it another shot when the Wife and kids don't go nuclear because Netflix has stopped for 15 minutes :)

  • 0 in reply to rfcat_vk

    rfcat_vk said:
    Why does your v17 network show a 100 and a 1000 connection on the same interface

     

    I have accepted your reply as an answer as it lead me to look at the connection. The long and the short of it is that I don't know why it was showing 100 an 1000 on the same interface, but hard-coding it to 100mb Full had me able to connect to the NBN again.

     

    So unless Scotty from marketing increases NBN from 100mb to something faster, I should be okay.

     

    Thanks for the help, now time to tame this V18 beast!

Cookie Information Banner