Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 27 subscribers
  • Views 7777 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IP mapping

mihir patel

hi sophos,

I'm new to sophos

i know how to set up live wan IP in sohpos XG firewall.

Now from the vendor i purchase leased line he give me a live static IP .

how to mapping that static IP with wan live ip.

I need to start Video conferance.

 

it's urjent

WAN IP : \

IP POOL:    xxx.yy.zzz.69/30

IP:             xxx.yy.zzz.70

gateway:   xxx.yy.zzz.69

LAN IP :  

ip pool:    aa.bb.cc.152/29

IP      :    aa.bb.cc.1mm::1nn:1oo::1pp:1qq

gateway:  aa.bb.cc.153

 

how can i configure this IP in MY firewall



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    first recommendation - contact your partner/reseller if the issue is urgent.

    Second

    WAN configuration I will assume it is an ethernet connection, but you have not advised so? You enter the values supplied in the displayed fields. You will need to enter IP address of your external interface with the net mask and then the gateway (ISP) address and give the gateway a name, then save it.

    How many ports does your XG have? A /29 will not give many internal IP addresses to use eg 4. What has happened to the XG default range created at install time?

    Ian

  • 0 in reply to rfcat_vk

    Ty.

    my xg default range is ok and  it is working.

    but what i need is

    on my port F i entered my live IP.

    to connect video conference i need live IP, my vendor give me LAN IP pool of 5 ip, and that guy said you have to configure NAT on your firewall.

    so you can access the video call on that LAN IP. 

    SO THIS is my confusion how can i configure this?

  • 0 in reply to mihir patel

    Hi,

    Do you only initiate the video calls or can people call you.

    I assume your video external is a seperate link to your normal traffic.

    The setup for your WAN (video) is as above. If you only originator video calls the a rule similar to this source LAN -> zone video (you create this with the IP range supplied) destination WAN - any zone -> services will be those of your video conference equipment. In the NAT and Routing tick MASQ and use your Video WAN gateway. (You could use any service until you have identified all the services and then restrict the access to those only).

    Ian

  • 0 in reply to rfcat_vk

    Hi,

    not only initiate also people can call.

    no sir my VC link is not separate link, it is with link with normal traffic.

  • 0 in reply to mihir patel

    Hi,

    this will take a little while to map out for you. In the meantime I would talk to your reseller/partner.

    Ian

  • 0 in reply to rfcat_vk

    I didn't get what u say or need??????

Reply Children
No Data