This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IP mapping

mihir patel over 7 years ago

hi sophos,

I'm new to sophos

i know how to set up live wan IP in sohpos XG firewall.

Now from the vendor i purchase leased line he give me a live static IP .

how to mapping that static IP with wan live ip.

I need to start Video conferance.

it's urjent

WAN IP : \

IP POOL: xxx.yy.zzz.69/30

IP: xxx.yy.zzz.70

gateway: xxx.yy.zzz.69

LAN IP :

ip pool: aa.bb.cc.152/29

IP : aa.bb.cc.1mm::1nn:1oo::1pp:1qq

gateway: aa.bb.cc.153

how can i configure this IP in MY firewall

This thread was automatically locked due to age.

Parents

0 rfcat_vk over 7 years ago

Hi,

first recommendation - contact your partner/reseller if the issue is urgent.

Second

WAN configuration I will assume it is an ethernet connection, but you have not advised so? You enter the values supplied in the displayed fields. You will need to enter IP address of your external interface with the net mask and then the gateway (ISP) address and give the gateway a name, then save it.

How many ports does your XG have? A /29 will not give many internal IP addresses to use eg 4. What has happened to the XG default range created at install time?

Ian
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 rfcat_vk over 7 years ago

Hi,

first recommendation - contact your partner/reseller if the issue is urgent.

Second

WAN configuration I will assume it is an ethernet connection, but you have not advised so? You enter the values supplied in the displayed fields. You will need to enter IP address of your external interface with the net mask and then the gateway (ISP) address and give the gateway a name, then save it.

How many ports does your XG have? A /29 will not give many internal IP addresses to use eg 4. What has happened to the XG default range created at install time?

Ian
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 mihir patel over 7 years ago in reply to rfcat_vk

Ty.

my xg default range is ok and it is working.

but what i need is

on my port F i entered my live IP.

to connect video conference i need live IP, my vendor give me LAN IP pool of 5 ip, and that guy said you have to configure NAT on your firewall.

so you can access the video call on that LAN IP.

SO THIS is my confusion how can i configure this?
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 7 years ago in reply to mihir patel

Hi,

Do you only initiate the video calls or can people call you.

I assume your video external is a seperate link to your normal traffic.

The setup for your WAN (video) is as above. If you only originator video calls the a rule similar to this source LAN -> zone video (you create this with the IP range supplied) destination WAN - any zone -> services will be those of your video conference equipment. In the NAT and Routing tick MASQ and use your Video WAN gateway. (You could use any service until you have identified all the services and then restrict the access to those only).

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 mihir patel over 7 years ago in reply to rfcat_vk

Hi,

not only initiate also people can call.

no sir my VC link is not separate link, it is with link with normal traffic.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 7 years ago in reply to mihir patel

Hi,

this will take a little while to map out for you. In the meantime I would talk to your reseller/partner.

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 mihir patel over 7 years ago in reply to rfcat_vk

I didn't get what u say or need??????
Cancel
Vote Up 0 Vote Down

Cancel