Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 1 subscriber
  • Views 2429 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN, Windows 8, accessing remote network

drweick
Windows 8
Everything works with a PPTP connection
Trying to configure an SSL VPN connection

ASG220 9.100-16
Interfaces:
Internal on eth0 10.10.5.1/16
External (WAN) on eth1 192.168.1.15/24

Masquerading rules:
Internal to External (WAN)
myusername (User Network) to External (WAN)

No NAT rules

SSL Profile:
myusername in users and groups
Internal (Network) in Local networks
Automatic firewall rules checked
Any in Interface Address
TCP/443
Virtual IP pool is VPN Pool (SSL) which 10.242.5.0/24
> in Advanced:Interface

Using Sophos VPN client I am able to connect, assigned IP address
10.242.5.6

However, I can't see/ping anything on the 10.10.5.x network
Using the PPTP everything works correctly and I can connect, ping, ssh, SMB mount, etc.

On my Windows 8 laptop ipconfig says:
10.242.5.6
255.255.255.252
no default gateway

What am I doing wrong?  

Thanks


This thread was automatically locked due to age.
Parents
  • 0
    Looked at the Sophos SSL status and noticed that the Windows route add commands were failing.  

    I ran them as admin in a cmd window and everything routes fine now.

    Do I need to run the Sophos client as admin?
Reply
  • 0
    Looked at the Sophos SSL status and noticed that the Windows route add commands were failing.  

    I ran them as admin in a cmd window and everything routes fine now.

    Do I need to run the Sophos client as admin?
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML