Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN, Windows 8, accessing remote network

Windows 8
Everything works with a PPTP connection
Trying to configure an SSL VPN connection

ASG220 9.100-16
Interfaces:
Internal on eth0 10.10.5.1/16
External (WAN) on eth1 192.168.1.15/24

Masquerading rules:
Internal to External (WAN)
myusername (User Network) to External (WAN)

No NAT rules

SSL Profile:
myusername in users and groups
Internal (Network) in Local networks
Automatic firewall rules checked
Any in Interface Address
TCP/443
Virtual IP pool is VPN Pool (SSL) which 10.242.5.0/24
> in Advanced:Interface

Using Sophos VPN client I am able to connect, assigned IP address
10.242.5.6

However, I can't see/ping anything on the 10.10.5.x network
Using the PPTP everything works correctly and I can connect, ping, ssh, SMB mount, etc.

On my Windows 8 laptop ipconfig says:
10.242.5.6
255.255.255.252
no default gateway

What am I doing wrong?  

Thanks


This thread was automatically locked due to age.
Parents
  • Hi ,

    Windows 8 sometime do issues with the TAP adapter.
    Try just to disable and enable the network connection adapter ( wireless or Ethernet ) used for this connection then tap diagnostics and let it finish.
    Then try again and see if it helps you.
    When the TAP windows driver fails the connection will be made sometimes but no route or default gateway will be created.
    You can track the connection status with double click on the Sophos ssl icon on the tray


    All my best

    Gil Peled.

    CEO- Expert2IT LTD.

    SOPHOS Platinum Partner.

    Gil@expert2it.co.Il.

Reply
  • Hi ,

    Windows 8 sometime do issues with the TAP adapter.
    Try just to disable and enable the network connection adapter ( wireless or Ethernet ) used for this connection then tap diagnostics and let it finish.
    Then try again and see if it helps you.
    When the TAP windows driver fails the connection will be made sometimes but no route or default gateway will be created.
    You can track the connection status with double click on the Sophos ssl icon on the tray


    All my best

    Gil Peled.

    CEO- Expert2IT LTD.

    SOPHOS Platinum Partner.

    Gil@expert2it.co.Il.

Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?