Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 2227 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

L2TP over IPSec - cant connect to local network

cpohle
Hello Forum,

I´ve tried using the searchengine, but can´t really find an answer to my question. Hope someone here can help. I´ve configured a L2TP over IPSec Connection in ASG V7. I´ve used the HowTo in the Knowledgebase.

The connection itself gets established and I´m able to ping the external Network Interface, but can´t reach a server or PC on the private site. My private IPs are 192.168.10.x and the VPN IP from the pool is 192.168.1.x.

I´ve configured a NAT Rule and also a Rule for the Packetfilter, but it does not work.

Someone got an Idea?

thank you so much...
Christian


This thread was automatically locked due to age.
Parents
  • 0
    If you can nail up the connection, it almost has to be a filter rule issue. I had something similar happen with a Site to Site VPN.
    Did you try setting up a gateway route to the other end of the vpn tunnel?
Reply
  • 0
    If you can nail up the connection, it almost has to be a filter rule issue. I had something similar happen with a Site to Site VPN.
    Did you try setting up a gateway route to the other end of the vpn tunnel?
Children
Cookie Information Banner