Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 1 subscriber
  • Views 1272 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN-Client inside->AstaroFW->VPN-Server

DjDagobert
Hi,
sorry if this question was already posted, but can someone tell me How to configure my AstaroFW that I can connect from my WinXP workstation inside the protected net to a VPN-Gateway in the internet?
Tanx a lot


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to esinctio
    For IPSEC you need to add an rule allowing UDP 500 to UDP 500 and also a rule for ESP with an SPI range from 254:65535, make these rules from your internal net to any and it will allow you to connect to any external IPSEC VPN device
  • 0 in reply to Tester100
    oki Thnx I will try  [:)]
  • 0 in reply to DjDagobert
    Hello,

    Symantec VPN-Client 7.0 pr 6.53 works great behind Astaro connecting to Remote Velociraptor or SEF. (Worked the last 5 days over such connection for testing...Karlsruhe->Berlin)

    I have Masquerading on and let any service from inside out. (IF restricting ports from inside to outside you have to allow the protocols/ports for IKE/ISAKMP "ProtocolType 50 + UDP500" )

    Bernd
  • 0 in reply to bbb_01
    This is really odd.. because what you say Bernd, was true for me in Astaro 2.x too.

    I have the Nortel Networks extranet access client, an while I had to do nothing to make it work in ASL 2.x, it just complains about "create socket failed with 10048".

    I have an "any any" rule for inside->outside traffic.