Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 1 subscriber
  • Views 1193 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can't connect from outsitde my external network

Eric95121
I'm on version 3.X and I can connect from an IP in my external subnet (the one on my outside nic) and my lan but I can't connect from any other IP's. The error is "The computer you dialed did not respond within a reasonable amount of time". I have a good fast connection there. Here are the rules I have setup:

1Any Any Any Allow
2PPTP-Pool Any { Private Networks - RFC1918 } Allow
3Public Network Any PPTP-Pool Allow 

Do I need another one?

[ 08 January 2002: Message edited by: Eric95121 ]



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Eric95121
    Welcome to the TCP/IP basics ; Just play with the netmask...

    Here is a suggestion for your PPTP-Pool :

    Network 10.0.1.32/27 (this is a netmask of 255.255.255.224)

    This will give you 30 ip addresses from 10.0.1.33 to 10.0.1.62 for your PPTP-Pool.

    Good luck.

    Patrice.
  • 0 in reply to Eric95121
    Well I figured it out.
    I changed my internal IP to 10.0.1.1 so I wasn't behind the existing firewall. Then I set the PPTP-Pool IP addres to 10.0.1.0. The problem now is when I use the  in Defenitions > Users, it assigns IP's starting at .4 which is in use. Is there a way to assign PPTP-Pool to a range of IP's ?
Unfiltered HTML