Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 4 subscribers
  • Views 8989 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

traffic route

Dennis Kho

what is the correct way to allow wireless guest & wireless staff print to Linux Print Server as picture show.

i had allow firewall policy guest/staff network - any - Linux proxy server / printer, however unable stil unable to ping or print.

seeking assist and appreciate.

Thanks 

Dennis



This thread was automatically locked due to age.
Parents
  • 0

    Dennis, does doing #1 in Rulz give any insights?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Yup rules on the TOP still unable to ping. 

    yesterday i had try any - any - any still cannot ping from Guest/Staff Wifi (192.168.X.X)

    if same segment (172.16.X.X) its OK. 

  • 0 in reply to Dennis Kho

    How is your eth2 configured, or more precisely, how are all your LANs configured to work from/on eth2?

    Your AP has a unique subnet, as have both of your wlan networks. Those interfaces should all be configured in UTM and you most likely need to use VLAN's to have it work.

    Can you show us how your ssid's are configured?

    Managing several Sophos UTMs and Sophos XGs both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

    Sometimes I post some useful tips on my blog, see blog.pijnappels.eu/category/sophos/ for Sophos related posts.

Reply
  • 0 in reply to Dennis Kho

    How is your eth2 configured, or more precisely, how are all your LANs configured to work from/on eth2?

    Your AP has a unique subnet, as have both of your wlan networks. Those interfaces should all be configured in UTM and you most likely need to use VLAN's to have it work.

    Can you show us how your ssid's are configured?

    Managing several Sophos UTMs and Sophos XGs both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

    Sometimes I post some useful tips on my blog, see blog.pijnappels.eu/category/sophos/ for Sophos related posts.

Children
  • 0 in reply to apijnappels

    ETH2 interface = 192.168.99.1/24

    Connect to Sophos AP55

    SSID Guest = 192.168.10.x/24

    SSID Staff = 192.168.20.x/24

    In this case no VLAN involve, in Sophos AP able to separate Guest and Staff network. 

    i still feel that is the Linux Print server policy issue. Will check on that as well. 

Unfiltered HTML