Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 5 subscribers
  • Views 12156 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos install using HDMI connection?

Jeff Siegel

Will there be the ability to install Sophos UTM 9.x on a motherboard that only has an HDMI connection?  I have an ITX board that has HDMI and DVI connections but installation gets stuck at 66% no matter which connection I use.  Board is a Gigabyte GA-Z170M Gaming 5.

 

Thanks for your assistance.



This thread was automatically locked due to age.
Parents
  • 0

    hi,

     

    did you try the following as mentioned by  for a similar issue , when stalled do the following :

    1. Press [Alt]+[F2] to bring up the console window.
    2. At the command prompt type cd /usr/lib and press [Enter].
    3. At the next prompt type bootstrap --install and press [Enter].  Apparently, this starts a second instance of the installer that does not get stuck on the "Hardware Detection" screen.

     

     

Reply
  • 0

    hi,

     

    did you try the following as mentioned by  for a similar issue , when stalled do the following :

    1. Press [Alt]+[F2] to bring up the console window.
    2. At the command prompt type cd /usr/lib and press [Enter].
    3. At the next prompt type bootstrap --install and press [Enter].  Apparently, this starts a second instance of the installer that does not get stuck on the "Hardware Detection" screen.

     

     

Children
Unfiltered HTML