Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 12197 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

3CX SIP NAT Rules

TCF
Has anybody successfully setup a 3CX SIP behind a Sophos UTM? I either get a huge delay when calling to the Voip numbers or if I change my NAT rules I can remove the delay and then not get an audio and all the Firewall test on the 3CX system fail.

Any help is appreciated.


This thread was automatically locked due to age.
Parents
  • 0

    Did you ever figure out how to fix this issue?  I have 3CX and am not able to get inbound traffic working.  I can make a call from a handset to an outside number, but the handset never has ring tone and the outside number does ring.  When you answer the outside number I get sound from inside to outside, but outside to inside audio doesn't work.  Our main number states it's not in service.

  • 0 in reply to RyanMills1

    This thread is kind of old, but I just installed 3CX the other day and ran into the same problem. After some fiddling, I found that the issue was caused by activating VoIP support on the VoIP (Network Protection -> VoIP).

    Hope this will help someone saving some time!

Reply
  • 0 in reply to RyanMills1

    This thread is kind of old, but I just installed 3CX the other day and ran into the same problem. After some fiddling, I found that the issue was caused by activating VoIP support on the VoIP (Network Protection -> VoIP).

    Hope this will help someone saving some time!

Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML