Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 2625 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing Problem if using two wan interface

amit@careoffice.co.in
Hi
I am testing on with Two wan interface. My scenario is 

I have an internal network with ip address 192.168.2.0
One Wan Interface for internet connection.
And One more WAN2 for other area network ip adress is 192.168.50.0

What is the step by step configuration for the setup of two wan.

I have previously configured with static routing but not successful in working with both network simultaneously.


This thread was automatically locked due to age.
Parents
  • 0
    Actually when i use dhcp on Wan2 i get reply from wan2 network, but when i use static ip ,i am not able to ping to wan two network.

    eg:  WAN2 DHCP - i get reply to ping from ip 192.168.50.1 pc,
    while using static ip 192.168.50.10 (WAN2) , i am not able to ping ip 192.168.50.1.

     I have also checked in firewall support tools, i am able to ping to wan 2 network within from firewall, while not able to ping from pc.
Reply
  • 0
    Actually when i use dhcp on Wan2 i get reply from wan2 network, but when i use static ip ,i am not able to ping to wan two network.

    eg:  WAN2 DHCP - i get reply to ping from ip 192.168.50.1 pc,
    while using static ip 192.168.50.10 (WAN2) , i am not able to ping ip 192.168.50.1.

     I have also checked in firewall support tools, i am able to ping to wan 2 network within from firewall, while not able to ping from pc.
Children
No Data