Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 2643 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing Problem if using two wan interface

amit@careoffice.co.in
Hi
I am testing on with Two wan interface. My scenario is 

I have an internal network with ip address 192.168.2.0
One Wan Interface for internet connection.
And One more WAN2 for other area network ip adress is 192.168.50.0

What is the step by step configuration for the setup of two wan.

I have previously configured with static routing but not successful in working with both network simultaneously.


This thread was automatically locked due to age.
Parents
  • 0
    Then I think you should use Multipath rules as BarryG is mentioning.

    You can create a rule Internal (Network) -> any -> Remote (Network) -> WAN2 

    That way UTM will always use WAN2 when destination is remote network (your 192.168.60.0 network probably).
    192.168.50.1 I guess is another router which is on the WAN2 subnet where your UTM also has a 192.168.50.x address (x should not be 1)
    The default-gateway of WAN2 should point to 192.168.50.1.

    Managing several Sophos UTMs and Sophos XGs both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

    Sometimes I post some useful tips on my blog, see blog.pijnappels.eu/category/sophos/ for Sophos related posts.

Reply
  • 0
    Then I think you should use Multipath rules as BarryG is mentioning.

    You can create a rule Internal (Network) -> any -> Remote (Network) -> WAN2 

    That way UTM will always use WAN2 when destination is remote network (your 192.168.60.0 network probably).
    192.168.50.1 I guess is another router which is on the WAN2 subnet where your UTM also has a 192.168.50.x address (x should not be 1)
    The default-gateway of WAN2 should point to 192.168.50.1.

    Managing several Sophos UTMs and Sophos XGs both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

    Sometimes I post some useful tips on my blog, see blog.pijnappels.eu/category/sophos/ for Sophos related posts.

Children
No Data
Cookie Information Banner