Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1089 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NAT problem

arokjh
My network structure is as follows:

internal: 192.168.0.0/24 gw: 254(astaro)
External: 211.174.X.1(astaro) gw: 254
External second: 211.174.X.2(astaro)

internal - ASTARO -External

default setting 

DNAT: Internet -> 211.174.X.2 convert 192.168.0.2
SNAT: 192.168.0.2 -> 211.174.X.2 convert 211.174.X.1

The problem?
can't convert to 211.174.X.1 (SNAT does not apply)

A solution to this problem?


This thread was automatically locked due to age.
Parents
  • 0
    SNAT: 192.168.0.2 -> 211.174.X.2 convert 211.174.X.1


    It looks like your traffic selector might be wrong. Use "Internet" instead of "211.174.X.2" - did that do what you want?

    If the IPs are on separate interfaces you will need a policy route to get the traffic to the right interface. 

    Cheers - Bob

    Sorry for any short responses!  Posted from my iPhone.
Reply
  • 0
    SNAT: 192.168.0.2 -> 211.174.X.2 convert 211.174.X.1


    It looks like your traffic selector might be wrong. Use "Internet" instead of "211.174.X.2" - did that do what you want?

    If the IPs are on separate interfaces you will need a policy route to get the traffic to the right interface. 

    Cheers - Bob

    Sorry for any short responses!  Posted from my iPhone.
Children
No Data