Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Roblox Games

How do I configure my firewall to allow Roblox games to pass through the firewall?  Web Security is configured correctly as far as I know. All of the logging is occurring in the firewall section.  They have so many ip addresses; I can't enter all their networks.  Please help my kids are dying, because they can't play their games! LOL [;)]


This thread was automatically locked due to age.
Parents
  • I realize this is an old thread but the issue came up again for me after a re-configuration.  I looked into Roblox's website and found the following:

     

    6.) Make Sure the Appropriate Ports are Open

    The ports that Roblox uses is dependent on the Operating System used. The port range is currently UDP 49152 - 65535, so keeping all these ports open should allow Roblox to connect to your router properly.

     

    So I created a FW rule that opened outbound UDP from kids network to ANY IP4 for ports from 1024:65525 to 49152:65535.  Worked like a champ.

     

    Now if the games used common accesses...

Reply
  • I realize this is an old thread but the issue came up again for me after a re-configuration.  I looked into Roblox's website and found the following:

     

    6.) Make Sure the Appropriate Ports are Open

    The ports that Roblox uses is dependent on the Operating System used. The port range is currently UDP 49152 - 65535, so keeping all these ports open should allow Roblox to connect to your router properly.

     

    So I created a FW rule that opened outbound UDP from kids network to ANY IP4 for ports from 1024:65525 to 49152:65535.  Worked like a champ.

     

    Now if the games used common accesses...

Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?