Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 2 subscribers
  • Views 5995 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless speed

arukaen
So my wife pointed out to me that the download speeds on her laptop were not doing so great and I decided to look into it myself. When I ran a speedtest I came up with 3Mbps on her laptop which is way off. I have Comcast Cable and am paying for the 20Mbps service. My desktop is getting the 20Mbps but the laptop is not. What could be wrong in my configuration?

Cable Modem > Astaro > Linksys E1000 (being used as an access point) > PS3, Laptops and cell phones connected to the router.

I tried looking through the logs but nothing is standing out. Where should I be looking


This thread was automatically locked due to age.
Parents
  • 0
    astaro:/home/login # ethtool eth1
    Settings for eth1:
            Supported ports: [ TP ]
            Supported link modes:   10baseT/Half 10baseT/Full
                                    100baseT/Half 100baseT/Full
                                    1000baseT/Half 1000baseT/Full
            Supports auto-negotiation: Yes
            Advertised link modes:  10baseT/Half 10baseT/Full
                                    100baseT/Half 100baseT/Full
                                    1000baseT/Half 1000baseT/Full
            Advertised pause frame use: No
            Advertised auto-negotiation: Yes
            Speed: 1000Mb/s
            Duplex: Full
            Port: Twisted Pair
            PHYAD: 1
            Transceiver: internal
            Auto-negotiation: on
            MDI-X: Unknown
            Supports Wake-on: g
            Wake-on: g
            Current message level: 0x000000ff (255)
                                   drv probe link timer ifdown ifup rx_err tx_err
            Link detected: yes


    astaro:/home/login # mii-diag eth1
    Basic registers of MII PHY #1:  1000 796d 0020 6180 05e1 c1e1 000d 2001.
     The autonegotiated capability is 01e0.
    The autonegotiated media type is 100baseTx-FD.
     Basic mode control register 0x1000: Auto-negotiation enabled.
     You have link beat, and everything is working OK.
     Your link partner advertised c1e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
       End of basic transceiver information.
Reply
  • 0
    astaro:/home/login # ethtool eth1
    Settings for eth1:
            Supported ports: [ TP ]
            Supported link modes:   10baseT/Half 10baseT/Full
                                    100baseT/Half 100baseT/Full
                                    1000baseT/Half 1000baseT/Full
            Supports auto-negotiation: Yes
            Advertised link modes:  10baseT/Half 10baseT/Full
                                    100baseT/Half 100baseT/Full
                                    1000baseT/Half 1000baseT/Full
            Advertised pause frame use: No
            Advertised auto-negotiation: Yes
            Speed: 1000Mb/s
            Duplex: Full
            Port: Twisted Pair
            PHYAD: 1
            Transceiver: internal
            Auto-negotiation: on
            MDI-X: Unknown
            Supports Wake-on: g
            Wake-on: g
            Current message level: 0x000000ff (255)
                                   drv probe link timer ifdown ifup rx_err tx_err
            Link detected: yes


    astaro:/home/login # mii-diag eth1
    Basic registers of MII PHY #1:  1000 796d 0020 6180 05e1 c1e1 000d 2001.
     The autonegotiated capability is 01e0.
    The autonegotiated media type is 100baseTx-FD.
     Basic mode control register 0x1000: Auto-negotiation enabled.
     You have link beat, and everything is working OK.
     Your link partner advertised c1e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
       End of basic transceiver information.
Children
No Data