This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bandwidth Limit For Single Host

So I have done a bunch of searching and I swear I have my setup right but it doesn't appear to be limiting the bandwidth properly.  I am trying to limit the bandwidth usage of a single host on my network.  I am running 8.003.  I want to allow 1Mbps download and 256Kbps upload.  The download appears to work fine but the upload doesn't.  I feel like I'm missing something really stupid...  Here are the speeds I'm seeing:



And here are my configs:





Can someone please spot the error of my ways?  Thanks so much!!!


This thread was automatically locked due to age.
Parents
  • Like William says, regulating traffic to the Internet is done with bandwidth pools on the External interface.  Regulating traffic from the Internet is done on the Internal interface.

    Danodemano's example above will now work, as I explained in modified post #3.  In the "Kids Outbound" bandwidth pool, the "Kids Inbound" traffic selector is not effective and can/should be un-checked.  Same for the "Kids Outbound" selector in the "Kids Inbound" pool.

    Cheers - Bob
  • Like William says, regulating traffic to the Internet is done with bandwidth pools on the External interface.  Regulating traffic from the Internet is done on the Internal interface.

    Danodemano's example above will now work, as I explained in modified post #3.  In the "Kids Outbound" bandwidth pool, the "Kids Inbound" traffic selector is not effective and can/should be un-checked.  Same for the "Kids Outbound" selector in the "Kids Inbound" pool.

    Cheers - Bob


    Sorry I'm still confused. I have one point still open:
    When I open a Bandwith Pool (WAN) - the Qos - Upload is working.

    If I try in another Network (DMZ) unfortunately the Upload is still affected from the LAN Rule (Qos Upload).

    Could you please help me out?

    Thank you very much.

    Best regards
    Zeus1976
Reply
  • Like William says, regulating traffic to the Internet is done with bandwidth pools on the External interface.  Regulating traffic from the Internet is done on the Internal interface.

    Danodemano's example above will now work, as I explained in modified post #3.  In the "Kids Outbound" bandwidth pool, the "Kids Inbound" traffic selector is not effective and can/should be un-checked.  Same for the "Kids Outbound" selector in the "Kids Inbound" pool.

    Cheers - Bob


    Sorry I'm still confused. I have one point still open:
    When I open a Bandwith Pool (WAN) - the Qos - Upload is working.

    If I try in another Network (DMZ) unfortunately the Upload is still affected from the LAN Rule (Qos Upload).

    Could you please help me out?

    Thank you very much.

    Best regards
    Zeus1976
Children
No Data