Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 2 subscribers
  • Views 1062 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

BUG?V8, unable to select add.ip.address from masquerading

mbulles
In V8 i'm not able to select an additional ip address from the 
Network Security/NAT/Masqquerading option when creating or cloning a new masquerading rule.

For example:

Interface: External WAN
Use address:  .... all my ip addresses are shown as defined under  Interfaces&Routing/Interfaces/Additional IP Addresses but as soon as I want to select one of the additional addresses the > always returns in the selection box.

Any idea what causes this behavior, is this by design or a bug in V8?


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BarryG
    Hi, fwiw SNAT is effectively the same as MASQ. 

    You don't need DNAT unless you want incoming traffic, and if you do, you need DNAT whether you're using MASQ or SNAT.

    Barry


    Hi, Thanx for the reply.

    I know it's effectively the same and it works, but the question is, if its a bug in V8that the additional addresses cannot be selected.