This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SIP Proxy -Calls Going Straight to Vmail

Hi Everyone,

I am using a a hosted PBX Service.  
I have a single Aastra 6757i CT, with a static Ip Address

ASL 7.504 running on ASG 110 hardware.
I was using the VoIP Security and it was working but then started running into issue where my calls were going straight to voicemail.  Outbound calls were fine.  If I restarted the phone, I could receive calls for about 1 minute or so, after a few minutes everything back to voicemail


I have created a packet filter rule to that allows that static address to go to my VoIP providers servers only.  i.e.   myphone -->myphoneproviders servers.  Right now that is my only working solution.

I checked the packet filter logs to ensure nothing getting dropped from that phone's ip address


Has anyone run into a similar issue or have any suggestions ?

Do I really need to use the VoIP proxy in my configuration ?

"G"


This thread was automatically locked due to age.
Parents
  • Hi, the VoIP Security system works for me with BroadVoice, but for a single SIP adapter, you should be fine with just the PacketFilter; that's how I ran mine before the VoIP Security system was added to Astaro.

    Barry
  • It's not working well for me.

    We have a SIP trunk setup, handles up to 8 simultaneous calls.
    I had to disable SIP Security as it seemed to be generating random SIP INVITE IP addresses.
  • Hi folks,
    there is a "bug" in v8b which allows that. For the moment there is a patch which stops it until a version of v8b has button which will allow for wide ranging to only one source for calls.
    Seeing it was in the v8b I expect that it came straight out of a recent 7.5xx version.

    I was going to insert all the patch steps, but have lost my copy. I cleaned up my desk.
    Ian M

    try this from he v8beta forum

    [FONT=Courier New][SIZE=3] 12995 ] - SIP configuration  inconsistency 

     Description: Parties other than the  configured "SIP server networks" are able to connect to SIP clients  behind the ASG. 
    Workaround : Change the 'sip_direct_signalling' option in  /etc/modprobe.d/netfilter to 1.

    [/SIZE][/FONT]
Reply
  • Hi folks,
    there is a "bug" in v8b which allows that. For the moment there is a patch which stops it until a version of v8b has button which will allow for wide ranging to only one source for calls.
    Seeing it was in the v8b I expect that it came straight out of a recent 7.5xx version.

    I was going to insert all the patch steps, but have lost my copy. I cleaned up my desk.
    Ian M

    try this from he v8beta forum

    [FONT=Courier New][SIZE=3] 12995 ] - SIP configuration  inconsistency 

     Description: Parties other than the  configured "SIP server networks" are able to connect to SIP clients  behind the ASG. 
    Workaround : Change the 'sip_direct_signalling' option in  /etc/modprobe.d/netfilter to 1.

    [/SIZE][/FONT]
Children