Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 1231 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

problema with smtp out and qos

QVICIO
good morning, I have a problem with the SMTP service

I have little upload speed on my ADSL line and to me this consuming all smtp service

So I would like to restrict the upload speed in the smtp service to 30kbps and I followed the instructions in this tutorial:

http://portal.knowledgebase.net/display/2n/kb/article.asp?aid=293191&n=7&s=1


but when I send any mail with a lot of weight .. Astaro monitor shows me that consumes the 512kbps upload you have the whole line ..


What am I doing wrong?

which is the correct way to restrict the upload speed for this service??

Thanks in advance


This thread was automatically locked due to age.
Parents
  • 0
    I should have looked more closely at your pic of the Bandwidth Pool.  It should be on the External interface instead of the Internal.  Change that, and you should get what you want.

    The trick to using QoS in the Astaro is to realize that you can't determine what volume of bits come toward the Astaro's interfaces, you only can control what the Astaro sends.  In other words, you manually can shape traffic going from the Internal interface to the 'Internal (Network)' and from the External interface to the Internet.

    Another way to think of this is that "Service-in" Traffic Selectors only work with Bandwidth Pools on the Internal Interface, and "Service-out" rules only work with Bandwidth Pools on the External interface.

    Cheers - Bob
  • 0 in reply to BAlfson
    Balfson thank you very much ... changing the interface has worked for the first .... I appreciate very much your patience and time ... I am very grateful ..

    Thanks
Reply Children
No Data