This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Limewire Issue Packets Dropping - BUG?

I've got this weird issue and I'd like to know if its a misconfiguration or a bug somewhere. I've done some packet rules to allow limewire to open and connect approprietly.

My first is a DNAT rule: Which allows MY PC to listen on port 6346 which is also configured in limewire for both "Listening Port" and "Manual Router Port" per the instructions. Auto Packet Filter Rule = OFF

Secondly, are the Packet Rules: I've even went as far as opening 6346 incoming and outgoing directory to my PC. Only reason was because I saw my log denying that port on incoming. So I did both ways to be safe.

This is of course my log, which mostly is allowing the packets to and from. I get a connection fine, thats not the problem.

My Problem IS

When Limewire is up and running and Im doing searching, my PC loses connection to the internet. I can't get to any website, let alone the Astaro Admin CP. If I shut down limewire completely, my connection is restored and I can get back on websites. So weird [:(]

Any ideas on this one?

This thread was automatically locked due to age.

Parents

0 BarryG over 17 years ago

FWIW, the drops are packets that aren't matching your network definitions... you might want one that says source port 6346, dest port 1024-65536

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 chugger93 over 17 years ago in reply to BarryG

I've done your recommendation and although the ports are now open and I see traffic going through, my internet connection still does not work. I can't think of anything else
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 chugger93 over 17 years ago in reply to BarryG

I've done your recommendation and although the ports are now open and I see traffic going through, my internet connection still does not work. I can't think of anything else
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 BarryG over 17 years ago in reply to chugger93

Are you running the latest version? (7.103)

Check the CPU & memory usage.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 chugger93 over 17 years ago in reply to BarryG

7.102 actually. CPU and memory are OK
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 17 years ago in reply to chugger93

Please post your network service definitions for the LimeWire service(s).

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 chugger93 over 17 years ago in reply to BarryG
Well firstly, this is the entry I found in the logs, when I goto open up a webpage with limewire open and downloading something. Internet works fine if limewire is open, just once I make a connection and start downloading 1 thing, it drops.

2008:02:24-11:40:26 (none) ulogd[2599]: id="2001" severity="info" sys="SecureNet" sub="packetfilter" name="Packet dropped" action="drop" fwrule="60002" initf="eth0" outitf="eth2" dstmac="00:03:47:2a:6d:cd" srcmac="00:04:5a:74:e4:06" srcip="192.168.1.3" dstip="72.14.207.99" proto="1" length="60" tos="0x00" prec="0x00" ttl="127" type="8" code="0"

and here are my service def's

They all work great, its just the dam internet drops.
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 17 years ago in reply to chugger93

Looks OK...

Under IM/P2P security, is everything turned off?
(should be off)

You might also try disabling the Intrusion Protection (IPS) under Network Security to see if that makes a difference.

Current version is 7.103, btw.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 chugger93 over 17 years ago in reply to BarryG

wow hmm, I'll do some more testing later, but with the IPS turned off, everything seems to be working. I can get to web pages now. Wow, weird... Why the heck would that be causing it.. hmm. Maybe its the UDP flood protection or something thats turned on
Cancel
Vote Up 0 Vote Down

Cancel
0 chugger93 over 17 years ago in reply to chugger93

Well looks like its the port-scan detection. With it off, works great... hmm
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 17 years ago in reply to chugger93

You might want to raise the thresholds there.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 chugger93 over 17 years ago in reply to BarryG

There are no thresholds on the port scan tab

That I can see anyways....
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 17 years ago in reply to chugger93

Sorry, I was thinking of the UDP flood protection.

Odd that Limewire would trigger the PSD... eMule and BitTorrent don't for me.
You're just running Limewire on one PC, right?

Barry
Cancel
Vote Up 0 Vote Down

Cancel