Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 1454 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

port forwarding not working

noamb
Hi all,

Device: ASG120, firmware 7.003

I am trying to forward WAN ports 5900, 5988, and 3283 to a host machine on our LAN.  I created a static DHCP map for that host, which is working correctly.  I then created a Service Definition Group containing those three service ports.  Finally, I created a packet filter rule:

Allow "External WAN (network)" -> host

using the service group.  However, I am unable to contact the host machine on those ports from outside the LAN.  Connections work fine inside the LAN.  Any suggestions?

Thanks!
noam


This thread was automatically locked due to age.
Parents
  • 0
    I can't make out what the screenshot says, it's too blurry.

    But make sure you have created an appropriate DNAT rule and also the corresponding Packet Filter rule. It sounds like you've done one, but not the other.
Reply
  • 0
    I can't make out what the screenshot says, it's too blurry.

    But make sure you have created an appropriate DNAT rule and also the corresponding Packet Filter rule. It sounds like you've done one, but not the other.
Children