This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

network rates

Hi all:

I'm testing astaro v5 with 3 nics (internet, lan, dmz). I had read that in v5 QoS is always on. When I test the nekwork rates from lan to dmz I have only 2Mbits. The nics and the swicht are 100Mbs. There is no traffic in the network. Why I only take 2Mbs?

Thanks

This thread was automatically locked due to age.

Parents

0 BarryG over 20 years ago

IPS on or off?

4.x didn't have IPS so you're comparing apples and oranges.

Turn IPS off, or disable it for INT-DMZ if you need to.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 Puilla over 20 years ago in reply to BarryG

IPS is off. All the nics are good detected. When I tranfer a file from intern to dmz or from dmz to intern (smb) I have only 2MBs of transfer rarte.
Cancel
Vote Up 0 Vote Down

Cancel
0 JimmyM over 20 years ago in reply to Puilla

What's the MTU on your LAN? Try transferring a large (500Meg) file. It will take a long time but you can do a top at the console and see if there's a process using a lot of ram or CPU diring a transfer.
Is it a direct transfer, or are you bouncing it off of the internal side of a DSL router?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 JimmyM over 20 years ago in reply to Puilla

What's the MTU on your LAN? Try transferring a large (500Meg) file. It will take a long time but you can do a top at the console and see if there's a process using a lot of ram or CPU diring a transfer.
Is it a direct transfer, or are you bouncing it off of the internal side of a DSL router?
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data