This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Astaro V5 and PPPoA issue

Greetings. I'm trying to setup my astaro v5 box to connect over my qwest dsl using PPPoA. The DSL modem I'm using is a Cisco 678 setup in transparent bridging mode. I know all my settings are correct for my PPPoA connection but it's not working. Below is my PPPoA log from astaro:

2004:06:25-18:25:10 (none) pppoa-sh: pptpc[704] removing UNIX domain socket /var/run/pptp/10.0.0.1 
2004:06:25-18:25:10 (none) pppoa-sh: pptpc[704] verifying running processes 
2004:06:25-18:25:11 (none) pppoa-sh: pptpc[704] pppd: : call dsl ipparam eth1#dsl failed
2004:06:25-18:25:11 (none) pppoa-sh: pptpc[704] pptp: call manager or gre-gateway failed
2004:06:25-18:25:11 (none) pppoa-sh: pptpc[704] one or more processes missing 
2004:06:25-18:25:11 (none) pppoa-sh: pptpc[704] shutting down pptp connection  10.0.0.1
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] removing UNIX domain socket /var/run/pptp/10.0.0.1 
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] encountered 4 errors so far 
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] connection terminated after 16 sec 
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] connection terminated prematurely 
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] restarting connection in 30 sec 
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] 4/3 critical error threshold 
2004:06:25-18:26:08 (none) pppoa-sh: pptpc[704] initiating PPTP connection 
2004:06:25-18:26:08 (none) pppoa-sh: pptpc[704] waiting 10 sec for ip-up script 
2004:06:25-18:26:08 (none) pppd-pppoa[1526]: pppd 2.4.2 started by (unknown), uid 0
2004:06:25-18:26:08 (none) pppd-pppoa[1526]: using channel 5
2004:06:25-18:26:08 (none) pppd-pppoa[1526]: Using interface ppp0
2004:06:25-18:26:08 (none) pppd-pppoa[1526]: Connect: ppp0  /dev/ttyp0
2004:06:25-18:26:09 (none) pppd-pppoa[1526]: sent [LCP ConfReq id=0x1     ]
2004:06:25-18:26:12 (none) pppd-pppoa[1526]: sent [LCP ConfReq id=0x1     ]
2004:06:25-18:26:15 (none) pppd-pppoa[1526]: sent [LCP ConfReq id=0x1     ]
2004:06:25-18:26:18 (none) pppoa-sh: pptpc[704] looking for IP info in /var/run/pptp/eth1#dsl 
2004:06:25-18:26:18 (none) pppoa-sh: pptpc[704] /var/run/pptp/eth1#dsl not found, check ip-up script 
2004:06:25-18:26:18 (none) pppoa-sh: pptpc[704] shutting down pptp connection  10.0.0.1
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: sent [LCP ConfReq id=0x1     ]
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Terminating on signal 15.
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: sent [LCP TermReq id=0x2 "User request"]
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Child process /usr/sbin/pptp-current 10.0.0.1 --nolaunchpppd (pid 1527) terminated with signal 15
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Modem hangup
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Connection terminated.
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Exit.

any ideas?


This thread was automatically locked due to age.
Parents
  • just an update...while looking at the link lights on the modem i noticed there is no traffic at all between the astaro box and the modem while it's supposedly trying to connect. Infact the log continues giving the same messages if the modem's connected or disconnected from the astaro box. I did try to manually ping the modem's ip address 10.0.0.1 which worked so I know the link from eth1 to the modem is good.
Reply
  • just an update...while looking at the link lights on the modem i noticed there is no traffic at all between the astaro box and the modem while it's supposedly trying to connect. Infact the log continues giving the same messages if the modem's connected or disconnected from the astaro box. I did try to manually ping the modem's ip address 10.0.0.1 which worked so I know the link from eth1 to the modem is good.
Children
No Data