Greetings. I'm trying to setup my astaro v5 box to connect over my qwest dsl using PPPoA. The DSL modem I'm using is a Cisco 678 setup in transparent bridging mode. I know all my settings are correct for my PPPoA connection but it's not working. Below is my PPPoA log from astaro:
2004:06:25-18:25:10 (none) pppoa-sh: pptpc[704] removing UNIX domain socket /var/run/pptp/10.0.0.1
2004:06:25-18:25:10 (none) pppoa-sh: pptpc[704] verifying running processes
2004:06:25-18:25:11 (none) pppoa-sh: pptpc[704] pppd: : call dsl ipparam eth1#dsl failed
2004:06:25-18:25:11 (none) pppoa-sh: pptpc[704] pptp: call manager or gre-gateway failed
2004:06:25-18:25:11 (none) pppoa-sh: pptpc[704] one or more processes missing
2004:06:25-18:25:11 (none) pppoa-sh: pptpc[704] shutting down pptp connection 10.0.0.1
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] removing UNIX domain socket /var/run/pptp/10.0.0.1
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] encountered 4 errors so far
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] connection terminated after 16 sec
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] connection terminated prematurely
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] restarting connection in 30 sec
2004:06:25-18:25:17 (none) pppoa-sh: pptpc[704] 4/3 critical error threshold
2004:06:25-18:26:08 (none) pppoa-sh: pptpc[704] initiating PPTP connection
2004:06:25-18:26:08 (none) pppoa-sh: pptpc[704] waiting 10 sec for ip-up script
2004:06:25-18:26:08 (none) pppd-pppoa[1526]: pppd 2.4.2 started by (unknown), uid 0
2004:06:25-18:26:08 (none) pppd-pppoa[1526]: using channel 5
2004:06:25-18:26:08 (none) pppd-pppoa[1526]: Using interface ppp0
2004:06:25-18:26:08 (none) pppd-pppoa[1526]: Connect: ppp0 /dev/ttyp0
2004:06:25-18:26:09 (none) pppd-pppoa[1526]: sent [LCP ConfReq id=0x1 ]
2004:06:25-18:26:12 (none) pppd-pppoa[1526]: sent [LCP ConfReq id=0x1 ]
2004:06:25-18:26:15 (none) pppd-pppoa[1526]: sent [LCP ConfReq id=0x1 ]
2004:06:25-18:26:18 (none) pppoa-sh: pptpc[704] looking for IP info in /var/run/pptp/eth1#dsl
2004:06:25-18:26:18 (none) pppoa-sh: pptpc[704] /var/run/pptp/eth1#dsl not found, check ip-up script
2004:06:25-18:26:18 (none) pppoa-sh: pptpc[704] shutting down pptp connection 10.0.0.1
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: sent [LCP ConfReq id=0x1 ]
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Terminating on signal 15.
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: sent [LCP TermReq id=0x2 "User request"]
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Child process /usr/sbin/pptp-current 10.0.0.1 --nolaunchpppd (pid 1527) terminated with signal 15
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Modem hangup
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Connection terminated.
2004:06:25-18:26:18 (none) pppd-pppoa[1526]: Exit.
any ideas?
This thread was automatically locked due to age.
