Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 887 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Inital config

Bruce Markey
Here is the situation. Im not quite sure how to fit astaro into this.  We have an incoming t1 with a router provided by the telecom company.  THe router is doing nat for us.  I would like to put the astaro box in between the internal computers and the router.   Can i just add two internals on the astaro box and have it "pass though"?  If anyone could shed some light on this it would be much appreciated.  
Thanks
Bruce
  


This thread was automatically locked due to age.
Parents
  • 0
    Bruce,

    you can have private addresses on both sides of the Astaro, no problem as long as this are two different networks!

    Example:

    internal network ---- 192.168.0.1/24 ASL 192.168.1.1/24 ---- router
    192.168.0.0/24        internal IF                 external IF

    You need to tell your router to route 192.168.0.0/24 to 192.168.1.1 in this example.

     
Reply
  • 0
    Bruce,

    you can have private addresses on both sides of the Astaro, no problem as long as this are two different networks!

    Example:

    internal network ---- 192.168.0.1/24 ASL 192.168.1.1/24 ---- router
    192.168.0.0/24        internal IF                 external IF

    You need to tell your router to route 192.168.0.0/24 to 192.168.1.1 in this example.

     
Children
No Data