Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 5478 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple virtual interfaces on one physical interface.

FormerMember
FormerMember
We own one SG 125 and our ISP is KabelBW. They provide multiple static public IP addresses, but via DHCP reservation, not as a subnet. We need to provide MAC adressess and can map each IP address to one MAC address.

I need to create five virtual interfaces, each having its own virtual MAC address. And they all need to obtain their IP address via DHCP. How do I do that?


This thread was automatically locked due to age.
Parents
  • 0
    With the UTM, you can only receive a single WAN IP Address via DHCP per interface.  Other addresses would then need to be added manually as Additional Addresses.

    Get your WAN interface MAC address at  Interfaces & Routing > Interfaces > Hardware.  Setup your WAN interface (if you haven't already done so) as Type Ethernet DHCP, which should get you your first address.  Your other addresses should be the next ones in order and could probably be extrapolated from the netmask, but to confirm, you can call your ISP support to get them.  Then you can setup the others at Interfaces & Routing > Interfaces > Additional Addresses, one IP per entry.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
  • FormerMember
    0 FormerMember in reply to Scott_Klassen
    With the UTM, you can only receive a single WAN IP Address via DHCP per interface.


    What? Really? Are you kidding me? This is pretty much standard. Every freaking operating system can do that. Why not Sophos? I need that!
Reply
  • FormerMember
    0 FormerMember in reply to Scott_Klassen
    With the UTM, you can only receive a single WAN IP Address via DHCP per interface.


    What? Really? Are you kidding me? This is pretty much standard. Every freaking operating system can do that. Why not Sophos? I need that!
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?