Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 3392 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Separate Wireless Network with limited bandwidth

Crisman
On my network I've the following:

UTM
   |
   v
Switch HP Procurve --> Sophos AP15 (Brigde to LAN) 192.168.10.0/24
   |
   v
                  Sophos AP30 (Bridge to LAN) 192.168.10.0/24

On the two AP's I would like to create another SSID for guests and create separate networks (ex: 172.16.1.0/24) but also would like to limit the bandwidth for this guest networks, how can I achieve this? 

Thanks. [:S]


This thread was automatically locked due to age.
Parents
  • 0
    A 'separate zone' creates an interface at the UTM that can be shaped via QoS like any other interface. Easiest is to shape at interface-level, "outbound" / "upload" is the direction AP -> Clients, which is the one you probably want. First, configure the max available bandwidth for the interface under 'advanced', then configure QoS.
Reply
  • 0
    A 'separate zone' creates an interface at the UTM that can be shaped via QoS like any other interface. Easiest is to shape at interface-level, "outbound" / "upload" is the direction AP -> Clients, which is the one you probably want. First, configure the max available bandwidth for the interface under 'advanced', then configure QoS.
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?