Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1442 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

External interface cycling up/down

Mike_Cunningham
UTM 9.205-12 software appliance running in an ESXI 5.1 VM

3 Intel PRO 1000 NICs (external, wireless, internal)
Setup as VMXNET3 in ESXi

The external interface (connected to a Rogers cable modem) is cycling up/down every 2 to 5 minutes.
No error lights on the cable modem.
UTM dashboard shows Error on eth2 then Up, then Error etc

Any suggestions where to look?

TIA,

Mike


This thread was automatically locked due to age.
Parents
  • 0
    Possibly related: I've got a client with an UTM120 w 9.205 on Comcast/Xfinity and the UTM dashboard is showing errors on the WAN interface.

    He's using the Comcast router in NAT mode, fwiw.

    Barry
Reply
  • 0
    Possibly related: I've got a client with an UTM120 w 9.205 on Comcast/Xfinity and the UTM dashboard is showing errors on the WAN interface.

    He's using the Comcast router in NAT mode, fwiw.

    Barry
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?