Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 2 subscribers
  • Views 2013 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PPoE issue

ghebosu
Hi,

I have some issues with PPPoE daemon. Each time the UTM is rebooted fot any reason ,the interface seems to be up but I cannot connect to internet. If I mannually reconnect it works . No errors appear in the PPPoE logs. 

If I try to ping an IP from internet I receive "destination net unreachable"

I am using UTM Home 9.201-25/ fiber to home internet connection.

Any ideas about this issue?

Regards,
Ghebosu


This thread was automatically locked due to age.
Parents
  • 0
    In ESXi, did you select the VMXNET3 NICs?  What MTU have you configured in the interface definition - have you tried a lower one to see if that's an issue?  After that, try setting the NIC to fixed speed and duplex settings, rebooting both the modem and the UTM between changes.  Any luck?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    In ESXi, did you select the VMXNET3 NICs?  What MTU have you configured in the interface definition - have you tried a lower one to see if that's an issue?  After that, try setting the NIC to fixed speed and duplex settings, rebooting both the modem and the UTM between changes.  Any luck?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?