Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PPPOE with MTU higher than 1492 (rfc-4638)

Hi,

It looks like MTU values higher than 1492 are not supported on my current version 9.201-23

Can anyone please advise if this is supposed to be like this as I read it was already implemented on previous versions.

(Support PPPoE RFC 4638 (MTU > 1492))

If not, is there any way to set the MTU value permanently on the ppp0 interfaz?

thanks in advance


This thread was automatically locked due to age.
Parents
  • Did you look in and edit Interfaces and Routing > Interfaces > Edit Interface, Advanced?

    XG 19.5 GA 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | GB Ethernet x5

  • Interestingly, default ADSL 2+ is 1492, I changed mine to 1500 and forced a reconnect and with an MTU of 1500 re-connected and posting this over the link with an MTU of 1500.
    So, appears to be supported.

    Ian
  • Interestingly, default ADSL 2+ is 1492, I changed mine to 1500 and forced a reconnect and with an MTU of 1500 re-connected and posting this over the link with an MTU of 1500.
    So, appears to be supported.

    Ian


    In the UK ADSL could use PPPoA or PPPoE

    PPPoE requires a maximum MTU of 1492, PPPoA is 1500. Domestic routers frequently have 1492 default MTU
Reply
  • Interestingly, default ADSL 2+ is 1492, I changed mine to 1500 and forced a reconnect and with an MTU of 1500 re-connected and posting this over the link with an MTU of 1500.
    So, appears to be supported.

    Ian


    In the UK ADSL could use PPPoA or PPPoE

    PPPoE requires a maximum MTU of 1492, PPPoA is 1500. Domestic routers frequently have 1492 default MTU
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?