Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 2 subscribers
  • Views 3215 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help..! :mad:

annam
Hi all!
I have a UTM320. i want create default route to internet over eht1:
0.0.0.0/0
int: eth1
or
0.0.0.0/0
gateway 192.168.1.1
but i can't save and receive report: "A default gateway can not be defined here. It can be defined within the definition of the interface UTM 320"
Somebody tell me what happending..? 
Tks..! [:)]


This thread was automatically locked due to age.
Parents
  • 0
    I have another problem:
    I LAG 4port: eth2,3,6,7 and trunk with PowerConnect 7024 allowed vlan all
    I ping from 7024 to address in UTM success. But connect PC to 7024 and asign vlan acc. Ping from PC to 7024 ok, PC ping to UTM320:  Destination host unreachable. 
    Can you tell me that problem..? 
    Thank..!
Reply
  • 0
    I have another problem:
    I LAG 4port: eth2,3,6,7 and trunk with PowerConnect 7024 allowed vlan all
    I ping from 7024 to address in UTM success. But connect PC to 7024 and asign vlan acc. Ping from PC to 7024 ok, PC ping to UTM320:  Destination host unreachable. 
    Can you tell me that problem..? 
    Thank..!
Children
  • 0 in reply to annam
    You mentioned VLANs. Is the PC in a different subnet than the UTM?
    Then the PowerConnect 7024 has to do proper routing, alternatively the UTM has to be configured for that VLAN.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Cookie Information Banner