Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1440 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

(tagged) VLAN with only one NIC ?

ManuelKarl
Hello there,

is it possible to create 2 VLANs on one NIC, which is already in use (webadmin, port 4444)?

I'm using a small Box from Zotac (via dualcore, 4gb), which works very well.
Now i want to use a hp procuve switch with 2 VLANs, one multihomed port which is used by the astaro.

i Think i have to use an unused nic, right?
So can i realize a VLAN-Setup with only one nic (onboard)?

Thx in advance,

Manuel


This thread was automatically locked due to age.
Parents
  • 0
    Hi Manuel,

    You can change the existing interface type from "ethernet standard" to "ethermnet vlan" (just tested with 8.300), and then add other vlan interfaces. But be carefull because you can easily lock yourself out by doing this. 

    Kind regards,

    Matthias
Reply
  • 0
    Hi Manuel,

    You can change the existing interface type from "ethernet standard" to "ethermnet vlan" (just tested with 8.300), and then add other vlan interfaces. But be carefull because you can easily lock yourself out by doing this. 

    Kind regards,

    Matthias
Children