Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

High usage or bad performance

Hi,
not sure if this is normal for an ASG 320HA. V8.103
It looks like that the performance is very high. The CPU usage is between 20-50 % permanently.
Does a proxy with activated single scan engine does take so much resources?
2 500 000/requests per day / logging enabled
some mail traffic (below 5000 mails/day)
This box is designed (data sheet) to manage 600 000 concurrent sessions and 165 Mbit/s UTM throughput.

Cheers,


top - 08:17:37 up 62 days, 8 min,  2 users,  load average: 0.53, 0.59, 0.50
Tasks: 150 total,   1 running, 147 sleeping,   0 stopped,   2 zombie
Cpu(s): 18.0%us,  4.0%sy,  0.0%ni, 78.0%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   2068092k total,  1935700k used,   132392k free,   338316k buffers
Swap:  1052248k total,   159920k used,   892328k free,   903736k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
 9963 postgres  20   0 49848  36m  35m S  5.6  1.8   2854:41 postgres
 9436 postgres  20   0 49700  37m  36m S  5.3  1.8   2715:34 postgres
 5154 root      19  -1  6356 3652  872 S  1.0  0.2   1632:38 ulogd
 5548 root      15  -5  9560 5964  404 S  0.7  0.3   1934:07 conntrackd
 6012 root      20   0  7404 3276 1232 S  0.7  0.2   1878:26 syslog-ng
26668 root      20   0 33100  14m 4088 S  0.7  0.7   0:14.84 smtpd.bin



top - 08:19:53 up 62 days, 10 min,  2 users,  load average: 0.82, 0.66, 0.54
Tasks: 153 total,   5 running, 146 sleeping,   0 stopped,   2 zombie
Cpu(s): 43.0%us, 16.4%sy,  0.0%ni, 29.2%id,  0.3%wa,  1.3%hi,  9.8%si,  0.0%st
Mem:   2068092k total,  1949860k used,   118232k free,   339220k buffers
Swap:  1052248k total,   159920k used,   892328k free,   915424k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
 6086 httpprox  20   0  387m 156m 3676 R 11.9  7.8   3369:39 httpproxy
20469 root      20   0 17288 9456 3512 S 10.9  0.5  13:53.43 websec-reporter
 6012 root      20   0  7404 3276 1232 S  7.3  0.2   1878:31 syslog-ng
 5548 root      15  -5  9560 5964  404 S  6.3  0.3   1934:11 conntrackd
 9963 postgres  20   0 49848  36m  35m R  5.0  1.8   2854:47 postgres
 5154 root      19  -1  6356 3652  872 S  4.6  0.2   1632:41 ulogd
31841 root      20   0  2324 1104  808 R  3.3  0.1   0:00.10 csync2
26668 root      20   0 33100  14m 4088 S  2.7  0.7   0:17.51 smtpd.bin
 9436 postgres  20   0 49700  37m  36m S  1.7  1.8   2715:39 postgres


This thread was automatically locked due to age.
Parents
  • Hi,
    not sure if this is normal for an ASG 320HA. V8.103
    It looks like that the performance is very high. The CPU usage is between 20-50 % permanently.
    Does a proxy with activated single scan engine does take so much resources?
    2 500 000/requests per day / logging enabled
    some mail traffic (below 5000 mails/day)
    This box is designed (data sheet) to manage 600 000 concurrent sessions and 165 Mbit/s UTM throughput.



    that utm throughput number is best case scenario.  how many users?  You say 5-10 mb/sec permanently..what kind of traffic is this?  Exactly which features and sub-features are you using?  Judging from your usage numbers above you are pushing things pretty well so nearly 50% cpu usage would not be unheard of..depending on features used and user count.
  • that utm throughput number is best case scenario.  how many users?  You say 5-10 mb/sec permanently..what kind of traffic is this?  Exactly which features and sub-features are you using?  Judging from your usage numbers above you are pushing things pretty well so nearly 50% cpu usage would not be unheard of..depending on features used and user count.


    I guess less than 250 web clients, mostly SSL. (AV single scan on)
    Routing mails 5000/day AV (single scan on)
    less than 5 DNAT rules, Initial packets are logged
    less than 10 firewall rules, 
    web logging on 
    mail logging on
    attached to Astaro ACC
    HA mode active/passive
    TCP Window scaling enabled
    Log FTP Data Connections
    Log Unique DNS Requests


    No wireless, no application control, no RED, no SSL/ISPSec

    Cheers
Reply
  • that utm throughput number is best case scenario.  how many users?  You say 5-10 mb/sec permanently..what kind of traffic is this?  Exactly which features and sub-features are you using?  Judging from your usage numbers above you are pushing things pretty well so nearly 50% cpu usage would not be unheard of..depending on features used and user count.


    I guess less than 250 web clients, mostly SSL. (AV single scan on)
    Routing mails 5000/day AV (single scan on)
    less than 5 DNAT rules, Initial packets are logged
    less than 10 firewall rules, 
    web logging on 
    mail logging on
    attached to Astaro ACC
    HA mode active/passive
    TCP Window scaling enabled
    Log FTP Data Connections
    Log Unique DNS Requests


    No wireless, no application control, no RED, no SSL/ISPSec

    Cheers
Children
No Data