Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 2 subscribers
  • Views 1288 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[7.502] - Additional Addresses PPPoE

andreaso
We still have a problem with our Additional Addresses.
If the Astaro miss the connection to our DSL modem, the only way to get the additional addresses up and running again are to disable and enable them again.

Any workaround on this issue?


This thread was automatically locked due to age.
Parents
  • 0
    If the DSL modem are restarted or the Astaro lose the connection because other reasons, the IP additional IP addresses don’t come up on its own. The are listed as activated, but status is down.
    If I manually deactivate them and then re-activate them again, the status changes to up.
Reply
  • 0
    If the DSL modem are restarted or the Astaro lose the connection because other reasons, the IP additional IP addresses don’t come up on its own. The are listed as activated, but status is down.
    If I manually deactivate them and then re-activate them again, the status changes to up.
Children
  • 0 in reply to andreaso
    The isp for a client just changed over to PPPoE and I am having this same issue.

    Have 4 "static" ips assigned. 

    However Astaro will not work with the Static PPPOE IP box selected for the external interface. If I let the provider assign, the first IP gets assigned to the external interface.

    Under additional ips, they will work when first setup and "turned on"
    However, if the ADSL link goes down, only the first ip on the external interface comes up. The additional ips stay in the "Down" state.

    They must be manually toggled off and on to become "up"

    Is this a provider issue?
    If so is there a way for Astaro to refresh these?

    Tom