This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

When I turn on http proxy, network goes up & dn

I installed Astaro on a new server with 640MB of memory and tons of diskspace.  When I turn http proxy on, Internet traffic works for a while then stops for 20 seconds, then works for 5 minutes, then stops for 20 seconds.  If I turn off http proxy, it works 100% of the time.  When it stops, not even pings go through and that isn't HTTP!  Even MSN Messenger stops.  I am not getting any emails about squid from the notification system.  No errors appear in cache.log.  Clearing the cache has no effect.  One possible hint, if I reinstall and turn on http proxy, it works for perfectly for 3 days or so.  I switched computers and used a much faster computer with more memory, and it is doing the exact same thing.  I went to the console and did many "ps -aux" commands and appended them to a file so I could read the output.  Squid usually is taking .1% of the CPU and at most it goes to 4%.  The disk usage is at 3% for the squid partition.  It is connected to my Cisco 675 router that is connected to DSL.  I love squid when it is working.  I usually get 50% hits from cache.  I have lots of free CPU and tons of free disk and lots of memory.  I REALLY REALLY REALLY want this to work and would appreciate any and all help!!!  


This thread was automatically locked due to age.
Parents
  • The following is my set up in the Proxy section for HTTP.  Been running for 3mos+ without an issue.

    Operation Mode: Transparent

    Log Level: Full

    Anonymity:  None

    Caching: Enabled

    Allowed networks: Lan

    Allowed target services:  Pick the ones you want to pass through the proxy

    Note:  Ensure the Status is green.

    Hope this helps

    Ken    
  • I thought it was fixed.  I removed the NICs and moved them to new slots.  But the problem came back about 14 hours later.  I will buy 2 new NICs and try again tomorrow.

    Any ideas from you folks???  What brand of NIC should I use.  I have the RealTek cheap ones.  I can go to Intel or 3COM.  What is best???? 
Reply
  • I thought it was fixed.  I removed the NICs and moved them to new slots.  But the problem came back about 14 hours later.  I will buy 2 new NICs and try again tomorrow.

    Any ideas from you folks???  What brand of NIC should I use.  I have the RealTek cheap ones.  I can go to Intel or 3COM.  What is best???? 
Children
  • I have some netgear and linksys that were around $15 that I'm using at home if you need something less expensive.   
  • What is the hostname of your ASL? Do you have a "_" in the name?

    Xeno  
  • The hostname is "router". 

    The network going up and down was happening so I took the following actions:
    1) I swapped out the machine I was using for ASL.  The new machine has a different motherboard, CPU, Memory, but the same NICs.
    2) I swapped out the NICs and reinstalled.  Again, it worked for a few hours and then started losing the network connection.

    So now I have a different box entirely.  I have the same ISP and the same CISCO 675.  I don't see how either of those could be the problem, but I have an open mind.

    Interesting.  Please, any help would be appreciated.

     - Star