Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Subscribers 4 subscribers
  • Views 5558 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Who can help: SG 115 rev. 2 beeps

FelixSteinbeis

Hi,

I switched on a brand new SG 115 rev. 2.

The manual says: "Once the security system has booted completely, you'll hear an acoustic signal: five beeps in a row."

My SG 115 rev. 2 don't beep any time.

Has the SG 115 rev. 2 a buzzer and could it broken?

Who can confirm "no beeps" or "five beeps" after boot?

Thanks.

Many Greetings

Felix



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Scott_Klassen
    Ok, I open a support ticket. But...

    Is the XG 115 device hardware the same as SG 115 device hardware?
    Then I think, the new models don't beep anymore.

    Look at the new Quick Start Guide for XG 85/105/115/125/135:
    "3. Power it on
    Connect the device to the power socket and turn it on
    Connect the device to the power supply using the power cable from the scope of supply. Turn the appliance on. The power switch is on the back side of the housing next to the power supply plug."

    And now, the Quick Start Guide for XG 210/230/310/330/430/450
    "3. Power it on
    Connect the device to the power socket and turn it on
    Connect the appliance to the power socket using the power cable(s) from the scope of supply. Turn the appliance on. The power switch is on the back side of the housing next to the power supply plug. Once the security system has booted completely, you’ll hear an acoustic signal: five beeps in a row."

    Felix
Unfiltered HTML