This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firmware Version 8 to 9 Help Required

In My Scenario,I have Hardware ASG 220 And Current Firmware is 8.314.
I want to update it Version 9.

Can any one here help me for this activity step by step?

On Managemet > Up2date Tab I have downloaded UTM 9 Package.There is Start Upgrade.

Is it possible to directly start upgrade from there or i have to install from CD ?

Thanks in Advance

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 10 years ago

Yes, with a Astaro appliance, you can do the Start Upgrade without needing an ISO.  It's called one-touch upgrade.

After the initial upgrade is finished, you should be on some older version of v9.  Not certain which at this point (feel free to post back what version it leaves you on).  Then your system will download the intermediary up2date packages to get you to at least 9.210.

If at 9.210 and you don't get further packages to take you to 9.3, you'll need to manually upload and apply ftp://ftp.astaro.de/UTM/v9/up2date/u2d-sys-9.210020-304009.tgz.gpg .  This will put you at 9.304, then 3 more packages will be downloaded to take you to most current, 9.307.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 10 years ago

Yes, with a Astaro appliance, you can do the Start Upgrade without needing an ISO.  It's called one-touch upgrade.

After the initial upgrade is finished, you should be on some older version of v9.  Not certain which at this point (feel free to post back what version it leaves you on).  Then your system will download the intermediary up2date packages to get you to at least 9.210.

If at 9.210 and you don't get further packages to take you to 9.3, you'll need to manually upload and apply ftp://ftp.astaro.de/UTM/v9/up2date/u2d-sys-9.210020-304009.tgz.gpg .  This will put you at 9.304, then 3 more packages will be downloaded to take you to most current, 9.307.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 kautilya over 10 years ago in reply to Scott_Klassen

Hey Scott_Klassen,

Thanks for response,

feel free to post back what version it leaves you on >Sure Will Post.

Most Probably, Will Upgrade to 9.210 only.

Can you pls tell me what is the difference between Red Box And Current New White Box ?

As support team,Suggested to Replace Red ASG 220 Box to White ASG 220.
Cancel
Vote Up 0 Vote Down

Cancel

Firmware Version 8 to 9 Help Required

Submitted a Tech Support Case lately from the Support Portal?