Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 14954 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

USB nic devices working with UTM 9.3

n00b_01
Hi,

I tried the Trendnet TU2-ET100 but this device will not be configure while installing v9.306.

Any hints for USB adapters found running? Maybe adapters using RTL8152/3 chipset?

Thanks & all the best, Ralf


This thread was automatically locked due to age.
Parents
  • 0
    Did you check the availability within the console? I had the problem with the Lemovo USB NIC. It wasn't recognized during installation, but was shown later in the console. And works well with PPPoE with 100MBit/s. The USB NIC is is USB 2.0 with Fast Ethernet.  I'm reaching 96 MBit/s.
    On a I5 with 8 GB RAM.
Reply
  • 0
    Did you check the availability within the console? I had the problem with the Lemovo USB NIC. It wasn't recognized during installation, but was shown later in the console. And works well with PPPoE with 100MBit/s. The USB NIC is is USB 2.0 with Fast Ethernet.  I'm reaching 96 MBit/s.
    On a I5 with 8 GB RAM.
Children
  • 0 in reply to GuBo
    Hi, I have a Startech USB 3.0 Ethernet adaptor and I would like to use it with my newly created UTM 9 on a Toshiba Satellite laptop. Startech provides linux drivers for their adaptor. Anyone have experience/luck getting this or any other USB Ethernet adaptor working with UTM when the drivers are provided?

    If I am barking up the wrong tree with getting drivers into the system, can anyone point me to a list of USB NICs that work with the latest (or recent) release?

    Thx,
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML