Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Refreshing my Hardware for Home UTM

Hi All

Been a very happy home user of UTM for a while now (2 years i think)

I've been running Dual Wan ADSL2 (2x 10 megabit lines) with a single LAN.  About 20 devices connected.  Just your usual home stuff like PCs, phones, tablets, HTPCs, NAS's etc.

Its running UTM on a DualCore Intel Core 2 Duo E8400 small factor HP PC.  2 gig of ram.  Onboard Lan and 2x realtek NICs.  With an old 80gb hard drive.

Want to do some refreshing of hardware:

the two areas I am thinking I should look at is:
1) replace the Lan's NIC with a quality Intel 1Gigabit/s card?
2) upgrade the hard drive to a new 7,200RPM model?  (I see cheap consumer SSD's are not recommended ?)

Would these couple of changes improve the performance?

Anything else I should look at?  

Is it ok to leave the ADSL links on Realtek NIC's - I wouldnt have imagined a performance gain switching to Intels?

The CPU seems to handle the job well, it doesnt max out.   Ram seems to always be ok too.


This thread was automatically locked due to age.
Parents
  • Well, I might be able to upgrade the board as I have some spares.

    How would this build go:

    Gigabyte GA-H61MA-D3V  Motherboard
    Intel G620 Processor
    8GB DDR 3
    New 7,200 RPM 500GB HDD
    Intel 1 Gigabit/second NIC for LAN
    Onboard Network for ADSL Modem 1  (Think it's realtek)
    Realtek NIC for ADSL Modem 2


    Q's:
    1) Are the Realtek NICs ok for the ADSL Modems
    2) what breed of HDD should i go for (eg a Green type power saver )
  • Well, I might be able to upgrade the board as I have some spares.

    How would this build go:

    Gigabyte GA-H61MA-D3V  Motherboard
    Intel G620 Processor
    8GB DDR 3
    New 7,200 RPM 500GB HDD
    Intel 1 Gigabit/second NIC for LAN
    Onboard Network for ADSL Modem 1  (Think it's realtek)
    Realtek NIC for ADSL Modem 2


    Q's:
    1) Are the Realtek NICs ok for the ADSL Modems
    2) what breed of HDD should i go for (eg a Green type power saver )


    Realtek NICs seem to be..."problematic".  I've seen in on these boards as well as other UTM appliance boards.  You may not have an issue with them or you may go through pains because of them.  If you PC supports the space or if you can find a small form factor model, you can get dual or even quad port Intel Gig-E NICs on Ebay.  Relatively inexpensive, too.

    The memory looks good.  I have the IPS, AV, and Web Protection modules running with 8GB with 1 PC, 2 servers, tablet, phone, and PS3 doing Netflix with no real performance issues.  I'm at 31% memory utilization.  That said, I do have the content filter database downloaded into RAM.

    I can't say much about the processor and board as I haven't used them but, baring any known performance problems with those platforms should work as dual-core units tend to be ran on the business class appliance models.  FYI, I'm running mine of a Core 2 Quad 8400.
Reply
  • Well, I might be able to upgrade the board as I have some spares.

    How would this build go:

    Gigabyte GA-H61MA-D3V  Motherboard
    Intel G620 Processor
    8GB DDR 3
    New 7,200 RPM 500GB HDD
    Intel 1 Gigabit/second NIC for LAN
    Onboard Network for ADSL Modem 1  (Think it's realtek)
    Realtek NIC for ADSL Modem 2


    Q's:
    1) Are the Realtek NICs ok for the ADSL Modems
    2) what breed of HDD should i go for (eg a Green type power saver )


    Realtek NICs seem to be..."problematic".  I've seen in on these boards as well as other UTM appliance boards.  You may not have an issue with them or you may go through pains because of them.  If you PC supports the space or if you can find a small form factor model, you can get dual or even quad port Intel Gig-E NICs on Ebay.  Relatively inexpensive, too.

    The memory looks good.  I have the IPS, AV, and Web Protection modules running with 8GB with 1 PC, 2 servers, tablet, phone, and PS3 doing Netflix with no real performance issues.  I'm at 31% memory utilization.  That said, I do have the content filter database downloaded into RAM.

    I can't say much about the processor and board as I haven't used them but, baring any known performance problems with those platforms should work as dual-core units tend to be ran on the business class appliance models.  FYI, I'm running mine of a Core 2 Quad 8400.
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?