This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Partial restore? Want to install additional NIC

I want to add an additional network card to my Astaro box (and have tried doing it manually with no luck). So when I do a reinstall the card shows up. But when I restore settings it seems to restore the old network card settings so I am back at square one with the card no-longer there...

Is there a way to restore all settings but not the NIC settings? Or is there an easy way to install an additional network card? When I have tried messing with adding a card in the GUI (in conjunction with command line) I sometimes end up getting locked out and have to reinstall...

This thread was automatically locked due to age.

Parents

0 BarryG over 10 years ago

Look at the Interfaces Hardware tab; all the NICs in the system should be listed there, regardless of whether they are configured/active.

Barry
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BarryG over 10 years ago

Look at the Interfaces Hardware tab; all the NICs in the system should be listed there, regardless of whether they are configured/active.

Barry
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Joelunch over 10 years ago in reply to BarryG

I've done a new install and given IPs to the three cards but when I restore I'm back to having only settings for the 2 cards...

I messed with the command line and got three cards to show up in the GUI but when I did a reboot I was down to one card and had to do a restore of an old file to get back to 2 cards...
Cancel
Vote Up 0 Vote Down

Cancel

Partial restore? Want to install additional NIC

Submitted a Tech Support Case lately from the Support Portal?