Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 922 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Partial restore? Want to install additional NIC

Joelunch
I want to add an additional network card to my Astaro box (and have tried doing it manually with no luck). So when I do a reinstall the card shows up. But when I restore settings it seems to restore the old network card settings so I am back at square one with the card no-longer there... 

Is there a way to restore all settings but not the NIC settings? Or is there an easy way to install an additional network card? When I have tried messing with adding a card in the GUI (in conjunction with command line) I sometimes end up getting locked out and have to reinstall...


This thread was automatically locked due to age.
Parents
  • 0
    So you are doing a completely new installation of UTM?  That is the only way to add new network cards to the UTM according to the documentation.  Then you apply your backup and the old car returns?

    Did you try to delete that old card out of the configuration?  Does it see your new card?

    XG 19.5 GA 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | GB Ethernet x5

Reply
  • 0
    So you are doing a completely new installation of UTM?  That is the only way to add new network cards to the UTM according to the documentation.  Then you apply your backup and the old car returns?

    Did you try to delete that old card out of the configuration?  Does it see your new card?

    XG 19.5 GA 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | GB Ethernet x5

Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML