Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 2 subscribers
  • Views 4172 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Memory Usage of 9.3 compared to 9.2?

LutzBHF
Hi,

I have an UTM220 HA Cluster running on version 9.209-8. During the 9.2 releases the memory usage got to the limit of this hardware. About 90-100% swap are used today. Is there any significant change in memory usage with the 9.3 release?

Thanks,
Lutz


This thread was automatically locked due to age.
Parents
  • 0
    In my installation the memory usage increased slightly (about 5%).
    You might have to to a little tweaking if running out of ressources (or consider switching to a pair of the new SG series)...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0
    In my installation the memory usage increased slightly (about 5%).
    You might have to to a little tweaking if running out of ressources (or consider switching to a pair of the new SG series)...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data
Unfiltered HTML