This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New Mini-ITX Build Questions

This is my first time building a computer from scratch so please bear with me if I've made a mistake. And I looked through the unofficial hardware thread for ideas. Below is a system I was thinking about building for home use. I have two questions if someone could help me with. One, I'm not to sure on the power supply. I was trying to go with minimal power requirements to save energy, but it's not a deal breaker. Will the one I selected power the system efficiently or will it be under powered? My second question was about the PCIe dual gigabit nic card. I'm fairly certain I found a dual gigabit PCIe card that will work on the motherboard I have selected, I would appreciate if someone with a little more experience could double check my research? 

I've already set up the Sophos UTM on a spare workstation and love it so far. Building a mini-ITX would be fun and look nicer where the cable modem sits. I appreciate and help/suggestions you may have.

Proposed system for home use (2 users, around 5 devices)
Intel PRO/1000 Pt Dual Port Server Adapter
Seagate Laptop Thin 320 GB 7200RPM SATA 6 GB/s 32 MB Cache 2.5 Inch Hard Disk Drive (ST320LM010)
Intel Core i3-4150 LGA 1150 - BX80646I34150
Kingston Technology HyperX 8 GB (2x4 GB Modules) 1600 MHz DDR3 Dual Channel Kit (PC3 12800) 240-Pin SDRAM KHX1600C9D3K2/​8GX
ASRock Mini ITX DDR3 1600 LGA 1150 Motherboard H81M-ITX
Mini-Box picoPSU-80 80 watt Output 12 volt Input DC-DC Power Supply
Morex 557 Universal Mini-ITX Case, Fan-less, Compact

Total 


This thread was automatically locked due to age.
Parents
  • Hi, I generally recommend a fast i3 (4150 is good) over any Celeron/Atom as the peak bandwidth capabilities are much higher.

    If you look around on Logic Supply or NewEgg (or search my posts here), you'll find one or two Haswell boards by AsRock or Jetway with dual Intel NICs.
    e.g. ASRock IMB-181-D 

    The board will cost more but you might not need the dual-port PCIe NIC.

    As far as PSUs go, I have a PicoPSU in my old Atom-based system and it seems to be quite efficent.
    However, some people have found the PicoPSU bricks to be unreliable.

    Currently, I like the SFX PSUs by Silverstone (on NewEgg). I have the 450w model ST45SF-G, but they have a new 300w one now too (ST30SF).
    The older models are not as well-rated.

    However, it looks like the case you chose won't accommodate even an SFX PSU.
    Also, the case you chose is fanless, which is probably not a great idea for most CPUs.

    My Atom is in a fanless Morex case, but it runs quite warm even though it only draws 17watts.

    An i3 system will idle close to 30 watts.
    The CPU fan will probably help (mine doesn't have one), but it may have to run at a high speed (noisy) to keep the CPU cool enough.

    If you have room for a larger case, I'd recommend it... there's several quiet mini-ITX cases available if you don't mind the size. 
    I also have the Fractal Design Node 304; it's near silent with the fans set to 'low'. 
    Coolermaster has a couple good ones too (and they're cheaper than the 304); check Anandtech's mini-ITX case reviews.

    Barry
Reply
  • Hi, I generally recommend a fast i3 (4150 is good) over any Celeron/Atom as the peak bandwidth capabilities are much higher.

    If you look around on Logic Supply or NewEgg (or search my posts here), you'll find one or two Haswell boards by AsRock or Jetway with dual Intel NICs.
    e.g. ASRock IMB-181-D 

    The board will cost more but you might not need the dual-port PCIe NIC.

    As far as PSUs go, I have a PicoPSU in my old Atom-based system and it seems to be quite efficent.
    However, some people have found the PicoPSU bricks to be unreliable.

    Currently, I like the SFX PSUs by Silverstone (on NewEgg). I have the 450w model ST45SF-G, but they have a new 300w one now too (ST30SF).
    The older models are not as well-rated.

    However, it looks like the case you chose won't accommodate even an SFX PSU.
    Also, the case you chose is fanless, which is probably not a great idea for most CPUs.

    My Atom is in a fanless Morex case, but it runs quite warm even though it only draws 17watts.

    An i3 system will idle close to 30 watts.
    The CPU fan will probably help (mine doesn't have one), but it may have to run at a high speed (noisy) to keep the CPU cool enough.

    If you have room for a larger case, I'd recommend it... there's several quiet mini-ITX cases available if you don't mind the size. 
    I also have the Fractal Design Node 304; it's near silent with the fans set to 'low'. 
    Coolermaster has a couple good ones too (and they're cheaper than the 304); check Anandtech's mini-ITX case reviews.

    Barry
Children
No Data